Q. Whole Body Periodic Acceleration(WBPA) bed adjustment.

The Whole Body Periodic Acceleration(WBPA) bed levelingmust be adjusted before use.

When you decide the area to place it, please adjust the level of the screw pads on the base of the machine until the screw pads are close to the ground, and then fix the nut; if you move the machine, you need to readjust the calibration according to the above method.

[Adjustment steps]

• Adjust all screw pads by hand, making sure the screw pads are close to the ground.
• Use a 14mm open-end wrench on the opposite side to rotate the foot nut to the right.